Osnovan 2013. godine, HOLOSUN® proizvodi vrhunske optike i uređaje za ciljanje. Specijaliziran je za inovativne refleksne i laserske nišane, kao i za optike kompatibilne s noćnim vidom. Tvrtka je poznata po tehnološki naprednim proizvodima, cijenjenima u civilnom, policijskom i vojnom sektoru. Značajke poput solarnih panela, Shake-Awake tehnologije i iznimno dugog trajanja baterije postavljaju nove standarde na tržištu refleksnih nišana i taktičkih pomagala za ciljanje.
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027063 UPC: 688292663570 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Black Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507C02 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027698 UPC: 688292725278 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Carbon Fiber Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507CDE11 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132043483 UPC: 688293087061 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Carbon Fiber Težina: 28.35 g Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132040796 UPC: 688293084220 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Dark Wood Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507CDEG88 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132043476 UPC: 688293088167 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Dark Wood Težina: 28.35 g Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027711 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: FDE (Flat Dark Earth) Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507C09 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027797 UPC: 688292725292 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: FDE Camo Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507CDEG83 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132043407 UPC: 688293087054 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: FDE Camo Težina: 28.35 g Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027117 UPC: 688292724936 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Gunmetal Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507C27 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027735 UPC: 688292725315 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Gunmetal Camo Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507CDEG85 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132043506 UPC: 688293087085 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Gunmetal Camo Težina: 28.35 g Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027841 UPC: 688292997699 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Navy Camo Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507CDEG86 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027728 UPC: 688292684728 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: OD Green Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507C21 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027810 UPC: 688292725308 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: OD Green Camo Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507CDEG84 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132043414 UPC: 688293087078 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: OD Green Camo Težina: 28.35 g Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027681 UPC: 688292720853 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Red Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507C06 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027759 UPC: 688292725285 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Red Camo Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507CDEG82 na Amazonu
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132043490 UPC: 688293087047 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Red Camo Težina: 28.35 g Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132027070 UPC: 688292726558 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 50x34.29x34.29 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: White Težina: 28.35 g Holosun BKA exception: ne Dodaci OpticGard Training Lens for Holosun 507C- X2/407C-X2 Prikladni članci Holosun otvoreni refleksni nišan HE407C-GR-X2, zeleno točka nišan, lov, airsoft, vojska, Elite serija, RMROtvoreni Elite refleksni nišan (Mini) s zelenim prikazom obilježava se svojom točkom od 2 MOA, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, načinom zaključavanja i robusnim… Holosun otvoreni refleksni nišan HE507C-GR-X2 s promjenjivim nišanom, zeleno točkaški nišan, lov, airsoft, vojska, Elite serija, RMROvaj otvoreni refleksni nišan ELITE (Mini) s zelenim pomičnim vizirima odlikuje se zamjenjivim vizirima, učinkovitim solarnim načinom rada s automatskom regulacijom svjetline, blokirajućim načinom ra… Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507C01 na Amazonu
The OpticGard cover for the Holosun® 507C-X3 / 407C-X3 offers protection against flying cartridge cases and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, which allows you to use the red dot even in sunlight or bright areas. Our scope covers are made from a TPU (thermoplastic polyurethane) material that provides abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping your optics device for concealed training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with rear sights mounted in front of the optics. Sufficient space is needed for the cover to snap onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optics. If you use it with a holster, please ensure that there is enough space between the holster and the cover. Designed in the USA: Full-featured optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock Absorbing: The OpticGard protective cover is shock absorbing and can be permanently installed without restricting firearm use. OpticGard protective cover with a precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132046491 UPC: 688293088488 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 49x34x28.5 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: bijela Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Holosun® 507C-X3 / 407C-X3 offers protection against flying cartridge cases and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, which allows you to use the red dot even in sunlight or bright areas. Our scope covers are made from a TPU (thermoplastic polyurethane) material that provides abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping your optics device for concealed training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with rear sights mounted in front of the optics. Sufficient space is needed for the cover to snap onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optics. If you use it with a holster, please ensure that there is enough space between the holster and the cover. Designed in the USA: Full-featured optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock Absorbing: The OpticGard protective cover is shock absorbing and can be permanently installed without restricting firearm use. OpticGard protective cover with a precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132045197 UPC: 688293088549 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 49x34x28.5 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Carbon Fiber Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Holosun® 507C-X3 / 407C-X3 offers protection against flying cartridge cases and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, which allows you to use the red dot even in sunlight or bright areas. Our scope covers are made from a TPU (thermoplastic polyurethane) material that provides abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping your optics device for concealed training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with rear sights mounted in front of the optics. Sufficient space is needed for the cover to snap onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optics. If you use it with a holster, please ensure that there is enough space between the holster and the cover. Designed in the USA: Full-featured optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock Absorbing: The OpticGard protective cover is shock absorbing and can be permanently installed without restricting firearm use. OpticGard protective cover with a precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132044862 UPC: 688293088495 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 49x34x28.5 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: crna Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGH507CX302 na Amazonu
The OpticGard cover for the Holosun® 507C-X3 / 407C-X3 offers protection against flying cartridge cases and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, which allows you to use the red dot even in sunlight or bright areas. Our scope covers are made from a TPU (thermoplastic polyurethane) material that provides abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping your optics device for concealed training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with rear sights mounted in front of the optics. Sufficient space is needed for the cover to snap onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optics. If you use it with a holster, please ensure that there is enough space between the holster and the cover. Designed in the USA: Full-featured optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock Absorbing: The OpticGard protective cover is shock absorbing and can be permanently installed without restricting firearm use. OpticGard protective cover with a precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132045210 UPC: 688293088587 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 49x34x28.5 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: Dark Wood Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Holosun® 507C-X3 / 407C-X3 offers protection against flying cartridge cases and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, which allows you to use the red dot even in sunlight or bright areas. Our scope covers are made from a TPU (thermoplastic polyurethane) material that provides abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping your optics device for concealed training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with rear sights mounted in front of the optics. Sufficient space is needed for the cover to snap onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optics. If you use it with a holster, please ensure that there is enough space between the holster and the cover. Designed in the USA: Full-featured optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock Absorbing: The OpticGard protective cover is shock absorbing and can be permanently installed without restricting firearm use. OpticGard protective cover with a precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132046514 UPC: 688293088518 Garancija: 1 Godine Customs tariff number: 90139005000 Mehanički parametri Dimenzije: 49x34x28.5 mm Materijal: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Boja kućišta: FDE (Flat Dark Earth) Holosun BKA exception: ne Informacije o sigurnosti proizvoda Proizvođač Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Odgovorni ekonomski operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]