The OpticGard Scope cover for the Aimpoint® ACRO P-2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbent and can remain installed permanently without limiting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043438 UPC: 688293088020 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Carbon Fiber Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1

The OpticGard Scope cover for the Aimpoint® ACRO P-2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbent and can remain installed permanently without limiting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043278 UPC: 688293087993 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1

The OpticGard Scope cover for the Aimpoint® ACRO P-2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbent and can remain installed permanently without limiting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043285 UPC: 688293088013 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1

The OpticGard Scope cover for the Aimpoint® ACRO P-2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbent and can remain installed permanently without limiting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043421 UPC: 688293088006 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1

The OpticGard Scope cover for the Aimpoint® ACRO P-2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbent and can remain installed permanently without limiting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043292 UPC: 688293087986 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Red Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1

Die OpticGard Scope-Abdeckung für das Osight® bietet Schutz gegen umherfliegende Patronenhülsen und Kratzer. Der intelligente Schnitt ermöglicht es, dass die Abdeckung auf die meisten hinteren und Suppressor-Visiere passt. Sie enthält auch eine abnehmbare Trainingslinse, mit der Sie den Rotpunkt auch bei Sonne oder in hellen Bereichen verwenden können. Unsere Scope-Abdeckungen bestehen aus einem Material aus TPU (Thermoplastisches Polyurethan), das Schutz vor Abrieb bietet. Darüber hinaus ermöglicht die schnelle und einfache Installation einen einfachen Zugang zu den Tasten, ohne die Abdeckung zu entfernen. Schließlich sichern die ineinander greifenden Pins die Abdeckung, sodass sie auch bei starkem Rückstoß von Pistolenschlitten nicht abfällt. Sind Sie es leid, Ihre Optik für Okklusionstraining abzukleben? Unsere abnehmbare Trainingslinse ist die moderne Lösung! Hinweis: Wichtige Informationen OpticGard-Abdeckungen sind möglicherweise nicht mit Backup-Visieren kompatibel, die vor der Optik montiert sind. Es wird ausreichend Platz benötigt, damit sich die Abdeckung an der Vorderseite des Optikgehäuses einrasten kann. OpticGard wird die Optik um ca. 0,08 Zoll (2 mm) an den Seiten erweitern. Wenn Sie zusammen mit einem Holster verwenden, stellen Sie bitte sicher, dass ausreichend Platz zwischen dem Holster und der Abdeckung vorhanden ist. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042974 UPC: 688293088259 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Dark Wood Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

OpticGard Limited Edition Visor Cover + Training Lens for Vortex Defender ST Dark Wood Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042752 UPC: 688293088297 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Dark Wood Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043131 UPC: 688293087924 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Carbon Fiber Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHDDE11_LC11 on Amazon

Επιλέξτε Housing color

+2

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043049 UPC: 688293088266 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Dark Wood Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHDDEG88_LCG88 on Amazon

Επιλέξτε Housing color

+2

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043179 UPC: 688293087917 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD27_LC438 on Amazon

Επιλέξτε Housing color

+2

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132042851 UPC: 688293087900 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD21_LC04 on Amazon

Επιλέξτε Housing color

+2

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043032 UPC: 688293087887 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Red Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD06_LC06 on Amazon

Επιλέξτε Housing color

+2

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043124 UPC: 688293087894 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+2

The OpticGard Scope cover for the Vortex® Defender-CCW offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043155 UPC: 688293087801 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 39.37x27.94x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

The OpticGard Scope cover for the Vortex® Defender-CCW offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043100 UPC: 688293087825 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 39.37x27.94x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Camo Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

The OpticGard Scope cover for the Vortex® Defender-CCW offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132041922 UPC: 688293087818 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 39.37x27.94x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Camo Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

The OpticGard Scope cover for the Vortex® Defender-CCW offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043117 UPC: 688293087795 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 39.37x27.94x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Red Camo Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

Το Kryt OpticGard παρέχει προστασία για το Holosun® SCS MP2 από πτώση κάλυκες και γρατζουνιές. Ο έξυπνος σχεδιασμός εξασφαλίζει προστασία που ταιριάζει στους περισσότερους πίσω σκοπευτικούς και σιγαστήρες. Περιλαμβάνει επίσης αποσπώμενο εκπαιδευτικό φακό, που επιτρέπει την ορατότητα του κόκκινου σημείου ακόμη και σε έντονο ηλιακό φως ή φωτισμένο περιβάλλον. Οι οπτικές προστασίες μας είναι κατασκευασμένες από TPU (θερμοπλαστικό πολυουρεθάνιο), προσφέροντας προστασία από φθορά. Η εγκατάσταση είναι γρήγορη και εύκολη, και τα κουμπιά είναι εύκολα προσβάσιμα χωρίς να αφαιρείται η προστασία. Τέλος, οι βίδες στερέωσης εξασφαλίζουν ότι η προστασία δεν θα ξεκολλήσει, ακόμα κι αν η ανάκρουση είναι ισχυρή. Κουραστήκατε να χάνετε ορατότητα κατά τη διάρκεια της εκπαίδευσης; Ο αποσπώμενος εκπαιδευτικός φακός μας είναι μια σύγχρονη λύση! Προειδοποίηση: Σημαντικές πληροφορίες Οι προστασίες OpticGard μπορεί να μην είναι συμβατές με τα εναλλάξιμα σκοπευτικά που έχουν τοποθετηθεί μπροστά από την οπτική συσκευή. Χρειάζεται επαρκής χώρος για την εγκατάσταση της προστασίας μπροστά από την οπτική συσκευή. Το OpticGard προσθέτει περίπου 0,08 ίντσες (2 mm) πάχους στις πλευρές της οπτικής συσκευής. Εάν χρησιμοποιείτε θήκη, βεβαιωθείτε ότι υπάρχει αρκετός χώρος μεταξύ της θήκης και της προστασίας. Κατασκευασμένο στις ΗΠΑ: Εκτεταμένη οπτική προστασία για τα σκόπευτρα των DSLR καμερών. Προστατεύει από σκόνη, γρατζουνιές, βρωμιά και φθορά. Στιβαρή προστασία: Η προστασία OpticGard έχει απορροφητική δράση και μπορεί να τοποθετηθεί μόνιμα χωρίς να περιορίζει τη χρήση του πυροβόλου όπλου. Το περίβλημα OpticGard έχει ακριβείς περιγράμματα για να εξασφαλίσει τέλεια εφαρμογή και πλήρη πρόσβαση στους ελέγχους του σκοπεύτρου SLR. Innehåller en träningslins för grundläggande ocklusionsövning. Snabb och enkel installation/borttagning, helt utan användning av verktyg. Βασικά δεδομένα EAN: 4055132043247 UPC: 688293088228 Εγγύηση: 1 χρόνια Αριθμός κατηγορίας τελωνειακής φόρτισης: 90139005000 Μηχανικοί παράμετροι Υλικό (Ylikó): Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Χρώμα περιβλήματος: Dark Wood Holosun: Χολοσαυρός BKA exception: όχι Πληροφορίες για την ασφάλεια του προϊόντος Κατασκευαστής Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Υπεύθυνος οικονομικός φορέας Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

Η θήκη προστασίας OpticGard για το Holosun® SCS VP9 προσφέρει προστασία από ιπτάμενα περιβλήματα και γρατσουνιές. Ο έξυπνος σχεδιασμός κοπής διασφαλίζει ότι η προστασία ταιριάζει στις περισσότερες σκοπευτικές όψεις και σφιγκτήρες ήχου. Περιλαμβάνει επίσης αποσπώμενο εκπαιδευτικό φακό, που επιτρέπει τη χρήση του σκοπευτικού με κόκκινη κουκίδα σε άμεσο ηλιακό φως ή λαμπερό περιβάλλον. Η θήκη μας κατασκευάζεται από TPU (θερμοπλαστική πολυουρεθάνη) και παρέχει προστασία από τη φθορά. Η γρήγορη και εύκολη τοποθέτηση κάνει τα κουμπιά εύκολα προσβάσιμα χωρίς να χρειάζεται να αφαιρεθεί η θήκη. Τέλος, οι κλειδαριές ασφαλείας διασφαλίζουν ότι η προστασία παραμένει στη θέση της παρά την έντονη ανάδραση. Βαρεθήκατε να προσθέτετε ταινίες εκπαίδευσης στην οπτική σας συσκευή για να μειώνετε την ορατότητα; Ο αποσπώμενος εκπαιδευτικός φακός μας είναι μια σύγχρονη λύση! ΣΗΜ: Σημαντικές πληροφορίες Οι θήκες OpticGard μπορεί να μην είναι συμβατές με σκοπευτικές όψεις που έχουν τοποθετηθεί μπροστά από την οπτική. Απαιτείται αρκετός χώρος για την τοποθέτηση της θήκης προστασίας μπροστά από το οπτικό κάλυμμα. Η OpticGard προσθέτει πλάτος στην οπτική περίπου 0,08 ίντσες (2 χιλιοστά) από κάθε πλευρά. Εάν χρησιμοποιείτε τσάντα, βεβαιωθείτε ότι υπάρχει αρκετός χώρος μεταξύ της τσάντας και της θήκης προστασίας. Κατασκευασμένο στις ΗΠΑ: Εκτεταμένη οπτική προστασία για τα σκόπευτρα των DSLR καμερών. Προστατεύει από σκόνη, γρατζουνιές, βρωμιά και φθορά. Στιβαρή προστασία: Η προστασία OpticGard έχει απορροφητική δράση και μπορεί να τοποθετηθεί μόνιμα χωρίς να περιορίζει τη χρήση του πυροβόλου όπλου. Το περίβλημα OpticGard έχει ακριβείς περιγράμματα για να εξασφαλίσει τέλεια εφαρμογή και πλήρη πρόσβαση στους ελέγχους του σκοπεύτρου SLR. Innehåller en träningslins för grundläggande ocklusionsövning. Snabb och enkel installation/borttagning, helt utan användning av verktyg. Περιεχόμενα παράδοσης 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Βασικά δεδομένα EAN: 4055132043957 UPC: 688293088242 Εγγύηση: 1 χρόνια Αριθμός κατηγορίας τελωνειακής φόρτισης: 90139005000 Μηχανικοί παράμετροι Διαστάσεις: 52x28x26 mm Υλικό (Ylikó): Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Χρώμα περιβλήματος: Dark Wood Κατάστημα+Ιστοσελίδα Περιεχόμενα παράδοσης: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun: Χολοσαυρός BKA exception: όχι Κατάλληλα άρθρα Holosun SCS-VP9-GR Ανοιχτό οπτικό σύστημα Reflex με κόκκινο σημείο + αλλαγή 2MOA σημείου, 32MOA κυκλικό σημάδι, ηλιακή κύτταρο, μαύρο, κυνήγι, σπορτιβ σκοποβολή, Softair, τακτικό μίνιΑυτό το ανοιχτό σκοπευτικό SCS-VP9-GR για το Heckler & Koch® VP9™ OR / SFP9 OR διακρίνεται για το ανταλλακτικό όραμα, την αποδοτική και επαναφορτιζόμενη λειτουργία ηλιακής ενέργειας με αυτόματο έλεγχ… Πληροφορίες για την ασφάλεια του προϊόντος Κατασκευαστής Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Υπεύθυνος οικονομικός φορέας Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

Η σιλικονούχα θήκη Holosun® SCS-PDP OpticGard προσφέρει προστασία από ιπτάμενα σωματίδια και γρατζουνιές. Οι έξυπνες κοπές εξασφαλίζουν ότι η θήκη ταιριάζει στις περισσότερες πίσω όψεις και αποσβεσμένα σκοπευτικά. Περιλαμβάνεται επίσης ένας αφαιρούμενος φακός εκπαίδευσης, που επιτρέπει τη χρήση του σκοπευτικού κόκκινου σημείου ακόμα και σε άμεσο ηλιακό φως ή σε έντονα φωτισμένες συνθήκες. Οι θήκες μας είναι κατασκευασμένες από υλικό TPU (θερμοπλαστική πολυουρεθάνη), που εξασφαλίζει προστασία από τη φθορά. Επιπλέον, η γρήγορη και εύκολη εγκατάσταση εξασφαλίζει ότι τα πλήκτρα είναι εύκολα προσβάσιμα χωρίς να αφαιρέσετε τη θήκη. Τέλος, τα πριτσίνια εξασφαλίζουν ότι η θήκη δεν αποσυνδέεται, ακόμη και όταν χρησιμοποιούνται όπλα με ισχυρή ανάκρουση. Έχετε βαρεθεί να καλύπτετε την οπτική με ταινία όταν εκπαιδεύεστε με έναν απατηλό στόχο; Ο αφαιρούμενος φακός εκπαίδευσης μας προσφέρει μια σύγχρονη λύση! Σημείωση: Σημαντικές πληροφορίες Οι θήκες OpticGard ενδέχεται να μην είναι συμβατές με αποσπώμενα σκοπευτικά μπροστά από την οπτική. Για την εγκατάσταση της θήκης απαιτείται αρκετός χώρος μπροστά από την οπτική. Το OpticGard προσθέτει περίπου 0,08 ίντσες (2 mm) στο μέγεθος της οπτικής στις πλευρές. Εάν χρησιμοποιηθεί θήκη με την οπτική, βεβαιωθείτε ότι υπάρχει αρκετός χώρος μεταξύ της θήκης και της εγκατεστημένης προστασίας. Κατασκευασμένο στις ΗΠΑ: Εκτεταμένη οπτική προστασία για τα σκόπευτρα των DSLR καμερών. Προστατεύει από σκόνη, γρατζουνιές, βρωμιά και φθορά. Στιβαρή προστασία: Η προστασία OpticGard έχει απορροφητική δράση και μπορεί να τοποθετηθεί μόνιμα χωρίς να περιορίζει τη χρήση του πυροβόλου όπλου. Το περίβλημα OpticGard έχει ακριβείς περιγράμματα για να εξασφαλίσει τέλεια εφαρμογή και πλήρη πρόσβαση στους ελέγχους του σκοπεύτρου SLR. Innehåller en träningslins för grundläggande ocklusionsövning. Snabb och enkel installation/borttagning, helt utan användning av verktyg. Βασικά δεδομένα EAN: 4055132041991 UPC: 688293088235 Εγγύηση: 1 χρόνια Αριθμός κατηγορίας τελωνειακής φόρτισης: 90139005000 Μηχανικοί παράμετροι Διαστάσεις: 50x27x26 mm Υλικό (Ylikó): Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Χρώμα περιβλήματος: Dark Wood Holosun: Χολοσαυρός BKA exception: όχι Κατάλληλα άρθρα Holosun SCS-PDP-GR Ανοιχτό οπτικό σύστημα ανακλαστικού κόκκινου σημείου + ανταλλακτικό σημείο 2MOA, 32MOA κυκλική ενότητα ηλιακών κυττάρων, μαύρο, κυνήγι, σκοποβολή αθλητισμού, Softair, tactical miniΑυτή η ανοιχτή οπτική σκοπευτική συσκευή SCS-PDP-GR για το Walther PDP 2.0 OR διαθέτει πράσινο στόχο 2MOA/32MOA και διακρίνεται για την αντικαταστασιμότητα του στόχου, την αποδοτική και επαναφορτιζόμ… Πληροφορίες για την ασφάλεια του προϊόντος Κατασκευαστής Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Υπεύθυνος οικονομικός φορέας Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]Αγοράστε το OGHSCSPDPDEG88_LCG88 στο Amazon

Επιλέξτε Housing color

The OpticGard Scope cover, for the Trijicon® RMR, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) providing protection against abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training cover for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. NOT COMPATIBLE WITH RMR DUAL-ILLUMINATED Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043193 UPC: 688293087337 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x31.75x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Carbon Fiber Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1

The OpticGard Scope cover, for the Trijicon® RMR, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) providing protection against abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training cover for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. NOT COMPATIBLE WITH RMR DUAL-ILLUMINATED Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132041892 UPC: 688293087306 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x31.75x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1

The OpticGard Scope cover, for the Trijicon® RMR, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) providing protection against abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training cover for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. NOT COMPATIBLE WITH RMR DUAL-ILLUMINATED Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043148 UPC: 688293087320 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x31.75x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Camo Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1

The OpticGard Scope cover, for the Trijicon® RMR, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) providing protection against abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training cover for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. NOT COMPATIBLE WITH RMR DUAL-ILLUMINATED Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132041939 UPC: 688293087313 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x31.75x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Camo Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Επιλέξτε Housing color

+1