Μεγιστοποιήστε την προστασία των οπτικών σας και αυξήστε την επιτυχία σας στην προπόνηση.

The OpticGard Scope cover for the Aimpoint® ACRO P-2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbent and can remain installed permanently without limiting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132033156 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132033231 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard Visier Cover for Eotech Eflx Designed in den USA: Vollwertiger Optikschutz für Ihr Reflexvisier. Schützt vor Splittern, Kratzern, Patronenhülsen und Abnutzung. Stoßhemmend: Die OpticGard Schutzabdeckung ist schockabsorbierend und kann dauerhaft installiert bleiben ohne die Schusswaffennutzung einzuschränken. OpticGard-Schutzabdeckung mit präziser Kontur, die eine passgenaue Montage und vollen Zugriff auf die Bedienelemente ihres Reflexvisiers gewährleistet. Enthält eine Trainingslinse für das unverzichtbare Okklusionstraining. Schnelle, einfache und komplett werkzeuglose Installation/Deinstallation. Main Data EAN: 4055132033170 Warranty: 1 years Customs tariff number: 90139005000 Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard Limited Edition Visor Cover + Training Lens for Vortex Defender ST Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard Visier Cover for Eotech Xps2 Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132033163 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard Visier Cover for Osight SE Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard Visier Cover for Vortex Defender ST Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Die OpticGard Scope-Abdeckung für das Osight® bietet Schutz gegen umherfliegende Patronenhülsen und Kratzer. Der intelligente Schnitt ermöglicht es, dass die Abdeckung auf die meisten hinteren und Suppressor-Visiere passt. Sie enthält auch eine abnehmbare Trainingslinse, mit der Sie den Rotpunkt auch bei Sonne oder in hellen Bereichen verwenden können. Unsere Scope-Abdeckungen bestehen aus einem Material aus TPU (Thermoplastisches Polyurethan), das Schutz vor Abrieb bietet. Darüber hinaus ermöglicht die schnelle und einfache Installation einen einfachen Zugang zu den Tasten, ohne die Abdeckung zu entfernen. Schließlich sichern die ineinander greifenden Pins die Abdeckung, sodass sie auch bei starkem Rückstoß von Pistolenschlitten nicht abfällt. Sind Sie es leid, Ihre Optik für Okklusionstraining abzukleben? Unsere abnehmbare Trainingslinse ist die moderne Lösung! Hinweis: Wichtige Informationen OpticGard-Abdeckungen sind möglicherweise nicht mit Backup-Visieren kompatibel, die vor der Optik montiert sind. Es wird ausreichend Platz benötigt, damit sich die Abdeckung an der Vorderseite des Optikgehäuses einrasten kann. OpticGard wird die Optik um ca. 0,08 Zoll (2 mm) an den Seiten erweitern. Wenn Sie zusammen mit einem Holster verwenden, stellen Sie bitte sicher, dass ausreichend Platz zwischen dem Holster und der Abdeckung vorhanden ist. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Βασικά δεδομένα EAN: 4055132027087 Εγγύηση: 1 χρόνια Αριθμός κατηγορίας τελωνειακής φόρτισης: 90139005000 Μηχανικοί παράμετροι Διαστάσεις: 50x34.29x34.29 mm Υλικό (Ylikó): Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Βάρος: 28.35 γ Holosun: Χολοσαυρός BKA exception: όχι Εξοπλισμός OpticGard Training Lens for Holosun 507C- X2/407C-X2 Κατάλληλα άρθρα Holosun HS407C-X2 Ανοιχτό Οπτικό Σκοπευτικό Κόκκινου Σημείου + 2MOA Σημείο Στόχευσης, Ηλιακή Κυψέλη, μαύρο, Κυνήγι, Σπορτιφόρες Σκοποβολές Softair, tactical miniΑυτή η ανοιχτή προστατευμένη οπτική σκοποθεσία (μίνι) με κόκκινη κωδικοποίηση διακρίνεται από την 2MOA σημείωσή της, την αποτελεσματική λειτουργία ηλιακής ενέργειας με αυτόματο έλεγχο φωτεινότητας, τ… Holosun ανοιχτό Reflexvisier HE407C-GR-X2, πράσινο σημάδι, κυνήγι, Airsoft, στρατιωτικό, Elite Σειρά, RMRΑυτή η ανοιχτή σκοπευτική σκοτοδιόπτερα ELITE Reflex (Mini) με πράσινη απόστασης διάκρισης διακρίνεται από το 2MOA στίγμα του, την αποδοτική λειτουργία ηλιακού λειτουργικού τρόπου με αυτόματο έλεγχο… Holosun HS507C-X2 Ανοιχτό οπτικό σύστημα ανακλαστικού κόκκινου σημείου + αντικαταστάσιμο 2MOA σημείο, 32MOA κυκλική στόχευση ηλιακή κυψέλη, μαύρο, κυνήγι, σπορ σκοποβολή, Softair, τακτικό miniΑυτή η ανοιχτή αντανακλαστική σκοποβολή με κόκκινο οπτικό-ηλεκτρονικό σηματοδότη 2MOA/32MOA διακρίνεται για την αλλαξιέρα βελτιώσιμου σηματοδοτού, την αποτελεσματική λειτουργία ηλιακού πάνελ με αυτόμ… Holosun ανοιχτό οπτικό σκόπευτρο HE507C-GR-X2 με αλλαξιές σημάδια, πράσινο σημάδι, κυνήγι, Airsoft, στρατιωτικό, Elite σειρά, RMRΑυτή η ανοιχτή σκοπευτική σκοποθεσία ELITE Reflex (Mini) με πράσινο δείκτη, διακρίνεται από την αντικατάσταση του δείκτη, την αποτελεσματική λειτουργία ηλιακής ενέργειας με αυτόματο έλεγχο φωτεινότητ… Holosun HS507C-X2 Offenes Reflex Rotpunktvisier + Adapterplatte für CZ Shadow 2 ORΗ ανοιχτή σκοπευτική συσκευή με κόκκινη κουκκίδα διαθέτει μέγεθος σκόπευσης 2 MOA/32 MOA, εναλλάξιμα σημεία στόχευσης, αποτελεσματική ηλιακή λειτουργία με αυτόματη ρύθμιση φωτεινότητας και ανθεκτική… Πληροφορίες για την ασφάλεια του προϊόντος Κατασκευαστής Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Υπεύθυνος οικονομικός φορέας Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50x34.29x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.35 g Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® EPS Carry offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Compatible Models: EPS CARRY Red MRS EPS CARRY Green MRS EPS CARRY Red 6 EPS CARRY Green 6 Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard protective cover 1 black training lens 1 training lens in matching design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 44.45x33.02x25.4 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard protective cover 1 black training lens 1 training lens in matching design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS Carry offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Σχεδιασμένο στις ΗΠΑ: πλήρης οπτική προστασία για το γείσο του κράνους σας. Προστατεύει από σωματίδια, γρατσουνιές, αποσύνθεση και φθορά. Ανθεκτικό στα κτυπήματα: Η προστασία OpticGard είναι ανθεκτική στα κτυπήματα και μπορεί να εγκατασταθεί μόνιμα χωρίς να περιορίζει τη χρήση των πυροβόλων όπλων. Το προστατευτικό κάλυμμα OpticGard έχει σχεδιαστεί με ακρίβεια ώστε να ταιριάζει τέλεια και να παρέχει πλήρη πρόσβαση στα χειριστήρια της ψηφιακής σας φωτογραφικής μηχανής DSLR. Se sisältää harjoitusremmin, joka on tärkeä okkluusiotreeniä varten. Γρήγορη και εύκολη εγκατάσταση/αφαίρεση χωρίς εργαλεία. Βασικά δεδομένα EAN: 4055132032470 Εγγύηση: 1 χρόνια Αριθμός κατηγορίας τελωνειακής φόρτισης: 90139005000 Μηχανικοί παράμετροι Διαστάσεις: 42x26x27 mm Υλικό (Ylikó): Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun: Χολοσαυρός BKA exception: όχι Κατάλληλα άρθρα Holosun SCS-320-GR Ανοιχτό Ρεφλέξ Κόκκινο Σημάδι + ανταλλακτικό σημάδι 2MOA, 32MOA Κυκλικό Αποτέλεσμα Ηλιακή κύτταρο, μαύρο, Κυνήγι, Σκοποβολή, Softair, τακτικό miniΑυτή η ανοικτή οπτική σκοπευτική συσκευή SCS-320-GR για το Sig Sauer OR P320 και το DPP Footprint Schnittstellen, με πράσινη όραση 2MOA/32MOA, διακρίνεται για την αντικαταστασιμότητα της όρασης, την… Πληροφορίες για την ασφάλεια του προϊόντος Κατασκευαστής Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Υπεύθυνος οικονομικός φορέας Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]Αγοράστε το OGHSCSCARRY στο Amazon

The OpticGard Scope Cover for the Holosun® SCS-PDP offers protection against flying shell cases and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing the red dot to be used even in sunlight or bright areas. Our scope covers are made from a TPU (Thermoplastic Polyurethane) material that provides abrasion protection. Furthermore, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover, so it doesn't fall off even with heavy recoil from firearms. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with replacement sights mounted in front of the optic. Sufficient space is needed for the cover to latch on the front of the optic housing. OpticGard will enlarge the optic by about 0.08 inches (2 mm) on the sides. If the optic is used with a holster, please ensure there is enough clearance between the holster and the cover attached. Designed in the USA: Full-fledged optic protection for your reflex sight. Protects against shards, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy and completely tool-free installation/deinstallation. Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50x27x26 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Delta Point Pro offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and poly-carbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVER WILL ONLY BE COMPATIBLE WITH METAL FRAME NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132033217 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGLDPP on Amazon

The OpticGard Scope cover for the Sig Sauer® ROMEO1PRO offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and poly-carbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVER WILL NOT FIT WHEN ALUMINUM SHROUD MOUNTED Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132033118 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x34.29x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGSR1PRODEG on Amazon

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033187 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD on Amazon

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover, for the Trijicon® RMR, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) providing protection against abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training cover for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. NOT COMPATIBLE WITH RMR DUAL-ILLUMINATED Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132033095 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x31.75x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Holosun BKA exception: no Accessesories 2Pcs OpticGard Traning Cover for Trijicon RMR Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132033224 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Holosun BKA exception: no Accessesories OpticGard Training Lens for Trijicon SRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTS on Amazon

The OpticGard Scope cover for the Vortex® Defender-CCW offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132033101 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 39.37x27.94x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGVDC on Amazon

The OpticGard Scope cover for the Vortex® Defender-CCW offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 39.37x27.94x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS MOS offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full-fledged optic protection for your reflex sight. Protects against shards, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy and completely tool-free installation/deinstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50x25x27 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS MP2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full-fledged optic protection for your reflex sight. Protects against shards, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, easy and completely tool-free installation/deinstallation. Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]