Burris®
Η Burris® Optics ιδρύθηκε το 1971 από τον Don Burris, πρώην μηχανικό σχεδιασμού στην Redfield Scopes, στις ΗΠΑ. Η εταιρεία άρχισε να παράγει σκοπευτικά όπλα, συμπεριλαμβανομένων καινοτομιών όπως το πρώτο μεταβλητό σκοπευτικό με μεγάλο διάμετρος αντικειμενικού φακού. Τη δεκαετία του 1980, η εταιρεία επεκτάθηκε και ανέπτυξε τη γκάμα των οπτικών συσκευών της. Σήμερα, η Burris® είναι επίσης μια αναγνωρισμένη μάρκα για οπτοηλεκτρονικά προϊόντα.
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031718 UPC: 688293031552 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Black Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF302 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031831 UPC: 688293031606 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Carbon Fiber Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF3DE11 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132043056 UPC: 688293084206 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Dark Wood Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF3DEG88 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031725 UPC: 688293031569 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE (Flat Dark Earth) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF309 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031893 UPC: 688293031613 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF3DEG83 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031794 UPC: 688293031590 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF327 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031886 UPC: 688293031637 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF3DEG85 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031909 UPC: 688293031644 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Navy Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF3DEG86 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031817 UPC: 688293031576 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF321 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031855 UPC: 688293031620 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF3DEG84 on Amazon
The OpticGard Scope cover for the Burris® FastFire 3 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, spent casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Includes a training lens for essential occlusion training. Quick, easy, and completely tool-free installation/deinstallation. Main Data EAN: 4055132031848 UPC: 688293031545 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.4x29x26.5 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: White Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGBFF301 on Amazon