OSIGHT®
OSIGHT®
OSIGHT® ist der opto-elektronische Firmenzweig von Olight und steht für innovative Zieloptiken, die höchste Präzision und Zuverlässigkeit liefern. Als Teil der renommierten Olight-Familie, kombiniert OSIGHT modernste Technologie mit optimierter Benutzerfreundlichkeit. Die Produkte sind speziell darauf ausgelegt, die Anforderungen von Sicherheitskräften, Jägern und Sportschützen zu erfüllen.
OpticGard Visier Cover for Osight SE black Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042066 UPC: 688293084541 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: black Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSE02 on Amazon
OpticGard Visier Cover for Osight SE Carbon Fiber Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042790 UPC: 688293084596 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Carbon Fiber Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSEDE11 on Amazon
OpticGard Visier Cover for Osight SE Dark Wood Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042035 UPC: 688293084947 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Dark Wood Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSEDEG88 on Amazon
Die OpticGard Scope-Abdeckung für das Osight® bietet Schutz gegen umherfliegende Patronenhülsen und Kratzer. Der intelligente Schnitt ermöglicht es, dass die Abdeckung auf die meisten hinteren und Suppressor-Visiere passt. Sie enthält auch eine abnehmbare Trainingslinse, mit der Sie den Rotpunkt auch bei Sonne oder in hellen Bereichen verwenden können. Unsere Scope-Abdeckungen bestehen aus einem Material aus TPU (Thermoplastisches Polyurethan), das Schutz vor Abrieb bietet. Darüber hinaus ermöglicht die schnelle und einfache Installation einen einfachen Zugang zu den Tasten, ohne die Abdeckung zu entfernen. Schließlich sichern die ineinander greifenden Pins die Abdeckung, sodass sie auch bei starkem Rückstoß von Pistolenschlitten nicht abfällt. Sind Sie es leid, Ihre Optik für Okklusionstraining abzukleben? Unsere abnehmbare Trainingslinse ist die moderne Lösung! Hinweis: Wichtige Informationen OpticGard-Abdeckungen sind möglicherweise nicht mit Backup-Visieren kompatibel, die vor der Optik montiert sind. Es wird ausreichend Platz benötigt, damit sich die Abdeckung an der Vorderseite des Optikgehäuses einrasten kann. OpticGard wird die Optik um ca. 0,08 Zoll (2 mm) an den Seiten erweitern. Wenn Sie zusammen mit einem Holster verwenden, stellen Sie bitte sicher, dass ausreichend Platz zwischen dem Holster und der Abdeckung vorhanden ist. Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042974 UPC: 688293088259 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Dark Wood Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
OpticGard Visier Cover for Osight SE FDE (Flat Dark Earth) Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132041861 UPC: 688293084565 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE (Flat Dark Earth) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSE09 on Amazon
OpticGard Visier Cover for Osight SE FDE Camo Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042004 UPC: 688293084602 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSEDEG83 on Amazon
OpticGard Visier Cover for Osight SE Gunmetal Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132041885 UPC: 688293084589 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSE27 on Amazon
OpticGard Visier Cover for Osight SE Gunmetal Camo Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132041878 UPC: 688293084626 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSEDEG85 on Amazon
OpticGard Visier Cover for Osight SE OD Green Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042042 UPC: 688293084572 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSE21 on Amazon
OpticGard Visier Cover for Osight SE OD Green Camo Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042417 UPC: 688293084619 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSEDEG84 on Amazon
OpticGard Visier Cover for Osight SE red Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042820 UPC: 688293084558 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: red Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
OpticGard Visier Cover for Osight SE white Designed in the USA: Full optical protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without limiting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Quick, simple, and completely tool-free installation/deinstallation. Main Data EAN: 4055132042059 UPC: 688293084534 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 43x28.5x25.8 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: white Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGOSE01 on Amazon
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045265 UPC: 688293088754 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: black Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045173 UPC: 688293088808 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Carbon Fiber Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045135 UPC: 688293088846 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Dark Wood Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045258 UPC: 688293088778 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE (Flat Dark Earth) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045166 UPC: 688293088815 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045159 UPC: 688293088822 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Green Hunting Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045142 UPC: 688293088839 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: grey Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132046507 UPC: 688293088792 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045241 UPC: 688293088785 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045128 UPC: 688293088761 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: red Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard cover for the Osight C provides protection against flying shell casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a removable training lens, allowing you to use the red dot even in sunlight or bright areas. Our scope covers are made from TPU (thermoplastic polyurethane) material that offers abrasion protection. Additionally, the quick and easy installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secure the cover so that it does not fall off, even with strong recoil from handgun slides. Tired of taping up your optic device for covered training? Our removable training lens is the modern solution! Note: Important Information OpticGard covers may not be compatible with backup sights mounted in front of the optic. Sufficient space is required for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2 mm) to the sides of the optic. If you are using it with a holster, please ensure there is enough space between the holster and the cover. Designed in the USA: Full-fledged optical protection for your reflex sight. Protects against splinters, scratches, shell casings, and wear. Shock absorbing: The OpticGard protective cover is shock absorbing and can remain permanently installed without restricting firearm use. OpticGard protective cover with precise contour, ensuring a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, simple, and completely tool-free installation/uninstallation. Main Data EAN: 4055132045272 UPC: 688293088747 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: white Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]