Trijicon®
Trijicon®, Inc. ir ASV uzņēmums, kas dibināts 1981. gadā. Šis uzņēmums kļuva globāli atpazīstams ar savu inovatīvo ACOG (Advanced Combat Optical Gunsight) - apgaismotu šautenes tēmekli, kas darbojas ar saules gaismu un/vai baterijām (un dažos modeļos ar tritiju). Bez ACOG, Trijicon piedāvā plašu citu produktu klāstu, tai skaitā sarkanā punkta tēmekļus un infrasarkanās nakts redzamības sistēmas.
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033392 UPC: 688293031866 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Navy Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHDDEG86 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033439 UPC: 688293031798 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD21 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033583 UPC: 688293031842 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHDDEG84 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033408 UPC: 688293031781 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE (Flat Dark Earth) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD09 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033446 UPC: 688293031811 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD27 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033606 UPC: 688293031835 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHDDEG83 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033613 UPC: 688293031774 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Black Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD02 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033415 UPC: 688293031828 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Carbon Fiber Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHDDE11 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033576 UPC: 688293031767 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: White Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD01 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033590 UPC: 688293031859 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Camo Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHDDEG85 on Amazon
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043131 UPC: 688293087924 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Carbon Fiber Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043049 UPC: 688293088266 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Dark Wood Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043179 UPC: 688293087917 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Gunmetal Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132042851 UPC: 688293087900 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043032 UPC: 688293087887 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Red Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data EAN: 4055132043124 UPC: 688293087894 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: FDE Camo Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
The OpticGard Scope cover, for the Trijicon® RMR, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) providing protection against abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training cover for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. NOT COMPATIBLE WITH RMR DUAL-ILLUMINATED Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132030643 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x31.75x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: OD Green Weight: 28.65 g Holosun BKA exception: no Accessesories 2Pcs OpticGard Traning Cover for Trijicon RMR Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTR21 on Amazon
Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Delivery Content 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Main Data Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Shop+Web Delivery Content: * 1 OpticGard Schutzabdeckung 1 schwarze Trainingslinse 1 Trainingslinse im passenden Design Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]
Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132030834 UPC: 688292663594 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Housing Color: Black Weight: 28.65 g Holosun BKA exception: no Accessesories OpticGard Training Lens for Trijicon SRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTS02 on Amazon