Trijicon®

The OpticGard® cover for the Trijicon® RMR HD offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard® Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard® will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in the USA: Comprehensive optic protection for your reflex sight. Protects against debris, scratches, shell casings, and wear. Shock-resistant: The OpticGard protective cover is shock-absorbing and can remain permanently installed without restricting the use of the firearm. OpticGard protective cover with precise contour that ensures a perfect fit and full access to the controls of your reflex sight. Contains a training lens for essential occlusion training. Fast, easy, and completely tool-free installation/uninstallation. Main Data EAN: 4055132033187 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 51x32x32 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTRHD on Amazon

The OpticGard Scope cover, for the Trijicon® RMR, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) providing protection against abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training cover for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. NOT COMPATIBLE WITH RMR DUAL-ILLUMINATED Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132033095 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x31.75x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Holosun BKA exception: no Accessesories 2Pcs OpticGard Traning Cover for Trijicon RMR Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Made from TPU (Thermoplastic Polyurethane), the OpticGard Scope Cover, for the Trijicon® SRO, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. Not only is it fast and easy to install, the scope cover provides easy access to the buttons without removing the cover itself. The interlocking pins secure the cover in place, even with heavy recoil from handgun slides. In addition, the cover includes a detachable training lens which allows you to maintain red dot visibility even in the sun or bright areas. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE:OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132033224 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 59.69x31.75x34.29 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Holosun BKA exception: no Accessesories OpticGard Training Lens for Trijicon SRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] OGTS on Amazon

The OpticGard Scope cover, for the Trijicon® RMRcc, offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) providing protection against abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. OPTICGARD COVERS ONLY WORKS WITH AUTHENTIC TRIJICON PRODUCTS. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE OPTIC COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Main Data EAN: 4055132033200 Warranty: 1 years Customs tariff number: 90139005000 Mechanical Parameters Size: 50.8x31.75x27.94 mm Material: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Weight: 28.65 g Holosun BKA exception: no Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]